全國咨詢熱線:
中空百葉玻璃隔斷的組裝步驟
1.準備材料：中空百葉玻璃、接頭、U型槽、掛件、固定螺釘?shù)取?/div>
1. Preparation materials: hollow louver glass, joints, U-shaped slots, pendants, fixing screws, etc.
2.根據實際需要，將中空百葉玻璃按照尺寸進行切割。
2. According to actual needs, cut the hollow louver glass according to its size.
3.在地面上鋪上一張軟墊，將切好的玻璃放置在墊子上，然后在兩側標記好固定位置。
3. Lay a soft cushion on the ground, place the cut glass on the cushion, and mark the fixed positions on both sides.
4.在固定位置處，則需要安裝U型槽，將其釘固在地面。
4. At the fixed position, a U-shaped groove needs to be installed and nailed to the ground.
5.然后將接頭連接在兩塊玻璃的底部。
Then connect the joint to the bottom of the two pieces of glass.
6.然后將已經連接好的玻璃和接頭放入U型槽中，確定位置后，再用螺釘將U型槽固定在地面。
6. Then place the already connected glass and joint into the U-shaped groove, determine the position, and then fix the U-shaped groove on the ground with screws.
7.然后在頂部位置安裝掛件，并用螺釘將其固定。
7. Then install the pendant at the top position and secure it with screws.
8.然后將已經安裝好掛件的頂部，和準備好橫梁進行連接。
Then connect the top of the already installed pendant with the prepared crossbeam.
9.濟南玻璃隔斷廠家提醒您，確定所有部件連接牢固，整體組裝完成。
9. Jinan glass partition manufacturer reminds you to ensure that all components are securely connected and the overall assembly is completed.
需要注意的是，組裝中空百葉玻璃隔斷時，需要特別注意各個部件的精度和承重能力，確保安裝的穩固性和性。如果沒有相關經驗，建議請的安裝師傅進行安裝?？梢噪S時咨詢我們http://www.anfeihb.com！
It should be noted that when assembling hollow louver glass partitions, special attention should be paid to the accuracy and load-bearing capacity of each component to ensure the stability and safety of installation. If you do not have relevant experience, it is recommended to hire a professional installation technician for installation. Feel free to consult us at any time http://www.anfeihb.com !
下一篇：鋼化玻璃門應如何選購和安裝 上一篇：高隔間隔斷的設計與整體風格要和諧搭配！
產品
資訊
- 2023-06-26 感應門正常情況介紹與運用留心事項
- 2023-06-26 鋼化玻璃門應如何選購和安裝
- 2023-06-21 肯德基門的幾個注意事項
- 2023-06-19 中空百葉玻璃隔斷的組裝步驟
- 2023-06-16 玻璃隔斷的重復利用
- 2023-06-14 高隔間隔斷的設計與整體風格要和諧搭配！
- 2023-06-12 感應門感應方式的特點
- 2023-06-09 肯德基門漏風的問題
